º£½ÇÂÛ̳

Nissan clutch installation and adjustment steps

The Nissan clutch is one of the most important parts in our car, so how much do we know about the clutch plate? How does it work? How do we adjust it? Let's briefly introduce it below.

We had a hard time getting into gear with the clutch pedal all the way down and the shifting gears rattled. If it is too thick, a spacer can be added between the clutch cover and the flywheel. For hydraulically driven clutches, in addition to the above inspections, it is also necessary to check whether the brake fluid is lacking, whether the pipeline is leaking, and the air in the hydraulic system is exhausted. Check whether the free travel of the clutch pedal is too large and adjust it. Check whether the separation lever height is consistent or too low. If the separation lever height is the same, and the separation is still not complete, check the lever height. Adjust the separation levers to the same height. If they can be completely separated, it means that the original adjustment is improper or the wear is very serious. After the release lever adjustment, the free travel of the clutch pedal must be readjusted. If the above adjustment is normal and the separation is still not complete, remove the clutch and check whether the driven plate is installed backwards, whether it is difficult to move axially, whether the release lever screw is loose, and whether the floating pin falls off.

The above content is some relevant knowledge of Nissan clutches that we have introduced to you. If you have needs in this regard, you can call us for consultation. If you want to know more product information, you can continue to pay attention to our website. We will Constantly update product knowledge to meet your more needs.